У "The TAPPI T826 test method is widely used for evaluating the short span compressive strength of paper and board materials, especially those used in container and box manufacturing. The test provides valuable information about the intrinsic compression performance of paper fibers by measuring the maximum compressive force a small test span can withstand before failure. For laboratories, packaging manufacturers, and quality control teams, TAPPI T826 short span compression testing offers an effective way to assess material strength, optimize board design, and improve packaging reliability.
У "The SCT-01 — випробувальний прилад для випробувань на стискання з короткою прогоновою довжиною from Cell Instruments is designed for accurate Випробування на міцність на стиск паперу та картону при невеликому прольоті in both machine direction (MD) and cross direction (CD). The instrument applies controlled compression to a precisely prepared test specimen and measures the maximum force required to cause compressive failure. It is suitable for paper and board materials with grammage ranging from 100 g/m² to 400 g/m², making it an ideal solution for packaging material development and production quality inspection.
What Is TAPPI T826 Short Span Compression Testing?
TAPPI T826 describes a test method for determining the compressive strength of paper and board over a short unsupported span. Unlike conventional compression tests that evaluate complete packaging structures, short span compression focuses on the compression resistance of the paper or board itself.
Paper-based packaging materials depend heavily on fiber strength to maintain structural performance. During manufacturing, transportation, stacking, and storage, corrugated boxes and paper containers experience compression forces from multiple directions. Measuring short span compressive strength helps engineers understand the material’s ability to resist these forces before designing final packaging structures.
The test evaluates the material’s inherent fiber network strength by minimizing the influence of buckling. Because the test span is extremely short, the measured compression force reflects the paper structure rather than the overall geometry of the specimen.
Чому випробування на міцність на стиск з коротким прольотом є важливим?
Paper and board compression performance directly affects packaging durability. A material with insufficient compressive strength may lead to:
- Reduced stacking performance during transportation
- Premature box deformation
- Lower protection for packaged products
- Increased packaging failure risks
- Unstable production quality
For packaging engineers, Випробування на міцність на стиск паперу та картону при невеликому прольоті provides important material data before converting paper into cartons, corrugated structures, or other packaging products.
The test is especially useful when comparing:
- Different paper grades
- Fiber compositions
- Виробничі процеси
- Raw material suppliers
- Surface treatment methods
By obtaining reliable compression strength values, manufacturers can select suitable materials while reducing excessive material usage and maintaining packaging performance.
Testing Principle of TAPPI T826 Method
The basic principle of TAPPI T826 short span compression testing is to compress a narrow paper or board specimen between two precisely aligned clamps until the sample fails.
The SCT-01 Short Span Compression Tester uses a 15 mm wide test piece held securely between two compression jaws. The clamps maintain a fixed test span of 0.70 mm, creating a controlled compression condition.
Під час тестування:
- A prepared specimen is placed between the upper and lower clamping jaws.
- The pneumatic clamps apply a consistent holding force to secure the sample.
- The compression mechanism moves the clamps together at a controlled speed.
- The instrument records the maximum compression force before failure.
- The measured value represents the compressive strength of the paper or board sample.
This testing method does not determine strain at break. Instead, it focuses on the maximum compressive force that the material can withstand under short-span conditions.
How Is Short Span Compression Testing Performed?
Надійний short span compression test requires accurate specimen preparation and controlled testing conditions.
Typical testing steps include:
Підготовка зразків
A paper or board specimen is prepared according to the required dimensions:
- Width: 15 mm
- Length: 75 mm
Samples are normally tested in both machine direction and cross direction because paper fiber orientation influences compression performance.
Sample Clamping
The SCT-01 uses specially designed compression clamps with high-friction contact surfaces. Each clamp includes stationary and movable jaws with a 30 mm clamping length.
The clamping system applies a constant force of:
2300 ± 500 Н
This ensures the specimen remains securely positioned during compression and prevents sample slipping.
Вимірювання ступеня стиснення
The instrument compresses the specimen at a controlled test speed:
3 ± 0,1 мм/хв
The maximum force recorded before failure represents the short span compressive strength of the sample.
Характеристики приладу для випробування на стискання коротких прольотів SCT-01
The SCT-01 is developed for laboratories and production environments requiring repeatable compression measurements for paper and board materials.
Основні особливості:
| Особливість | Опис |
|---|---|
| Метод випробування | Випробування на стискання з короткою прольотом |
| Інструкція щодо виконання тесту | Поздовжній та поперечний напрямки |
| Ширина вибірки | 15 мм |
| Відстань стиснення | 0,3–2 мм |
| Випробувальний полігон | 1–500 Н або за індивідуальним замовленням |
| Резолюція | 0,01 Н |
| Швидкість тестування | 3 ± 0,1 мм/хв |
| Операційна система | Управління за допомогою ПЛК з інтерфейсом HMI |
| Спосіб затискання | Пневматичне затискання зразка |
| Одиниці вимірювання даних | Н, кгс, фунт-сила |
| Комунікація | Додатковий інтерфейс RS-232 |
The PLC-controlled system provides stable operation, while the HMI interface allows operators to easily configure test parameters and review results.
Advantages of Using SCT-01 for Paper and Board Testing
Accurate Compression Force Measurement
The SCT-01 provides high-resolution force measurement with a resolution of 0.01 N, allowing laboratories to detect small differences between paper grades and production batches.
Stable Sample Holding
Pneumatic clamping ensures consistent holding pressure and reduces operator influence during testing. Proper alignment between clamps improves repeatability.
Flexible Testing Settings
Adjustable test parameters allow users to evaluate different paper and board materials according to their specific quality requirements.
Зручне управління даними
The optional RS-232 communication function enables connection with external software systems for data collection and laboratory management.
Improved Quality Control
Manufacturers can use test results to monitor incoming raw materials, optimize production processes, and verify finished product performance.
Застосування випробувань на стискання конструкцій з невеликою прогоновою довжиною
Short span compression strength testing of paper and board is widely applied in industries that depend on reliable paper-based packaging materials.
До типових сфер застосування належать:
Виробництво гофрованої упаковки
Containerboard producers use compression data to evaluate paper performance before converting it into corrugated packaging structures.
Виробництво картону
Paper mills use compression testing to compare different grades and monitor manufacturing consistency.
Дослідження та розробка упаковки
R&D engineers use short span compression results to develop lightweight packaging solutions while maintaining strength requirements.
Лабораторії контролю якості
Independent laboratories and inspection organizations use standardized compression testing methods for material evaluation and supplier verification.
Materials Suitable for TAPPI T826 Testing
The SCT-01 is suitable for testing various paper and board materials, including:
- Картон для контейнерів
- Пакувальний папір
- Паперовий картон
- Box manufacturing materials
- Елементи гофрованої упаковки
It is particularly suitable for materials within the recommended grammage range of:
від 100 г/м² до 400 г/м²
Відповідні стандарти для випробувань на стискання конструкцій з короткою прогоновою довжиною
The SCT-01 Short Span Compression Tester supports testing methods related to:
| Стандартний | Опис |
|---|---|
| TAPPI T826 | Short span compression strength testing of paper and board |
| ISO 9895 | Compression testing method for paper and board materials |
| DIN 54518 | Compression testing requirements for paper products |
| BS 7325 | Метод випробування паперу та картону на стискання |
| GB/T 2679.10 | Paper and board compression strength testing |
| QB/T 2386 | Paper and packaging material testing requirements |
These standards provide recognized approaches for evaluating paper and board compression properties across different markets.
Choosing the Right Short Span Compression Tester
When selecting equipment for short span compressive strength measurement, laboratories should consider:
- Testing accuracy and resolution
- Clamp design and alignment
- Compression control stability
- Software and data management capability
- Compatibility with required standards
- Manufacturer support and customization options
The SCT-01 provides a practical solution for companies requiring reliable compression data for packaging development, production monitoring, and laboratory quality assurance.
Cell Instruments also provides customized fixtures and testing solutions for specialized material evaluation requirements, helping customers adapt testing systems to unique applications.